Bidet Water Pressure Too High

The ideal water pressure for a bidet measures between 40 and 60 PSI. If the bidet water pressure too high, it causes a series of bathroom plumbing problems. There are numerous reasons your bidet water pressure is too high, so it is essential to determine the cause.

If you are in the market searching for a good bidet, consider reading our guide on the best bidet convertible kits today. We hope it will help you in your search.

Bidet Water Pressure Too High: Top Causes

You will find numerous indicators of high water pressure in your bathroom.

Some indications include a leaky water heater, leaky faucets, running out of hot water quickly, banging pipes, strange noisy appliances such as washing machines and dishwashers, or recurrent breakdown in appliances that use water that your water is running too high. 

Many manufacturers suggest pressure no higher than 80 PSI for their appliances. However, it can frequently reach at least 100 to 150 PSI. Fortunately, it is simple enough to test the water pressure of your bidet with a gauge purchased from your local home center. 

This tool could reach from at least $10 for a cheaper model up to approximately $25 for one that could record readings over a set of time.

You can attach the gauge to an outside faucet or the drain connection. If your bidet reads more than 80 PSI, it may be time to take other steps. 

Here are some of the causes why your bidet water pressure is too high: 

1. Water Pressure Regulator

There are instances when the water stream of your home can become too powerful. Your bidet may not be the only one experiencing problems. You can open your shower and feel the current pressure. The water pressure regulator may be the culprit of high bidet water pressure. 

Use a pressure gauge to determine the current water pressure. Lower the water pressure using a wrench and turn the adjustment screw counterclockwise. 

In case your regulator is not properly working, we recommend getting the help of a professional plumber so they can replace your water pressure regulator. 

2. Nozzles

In case you didn’t know, your bidet’s nozzle might be causing the high water pressure. Keep in mind that various spray modes will have various working areas. Other bidets feature different dual nozzles for men and women. 

To fix this problem, press the buttons on the remote control to adjust the nozzle positions. You can also adjust your sitting position.  

3. Spray Modes

Many bidet manufacturers develop advanced electric bidet seats featuring various modes to cater to users’ wide-ranging needs. Frequently, they provide soft and lower water pressure to handle the ladies’ bits. 

It sometimes comes with strong modes, such as the “turbo wash” or the “vortex mode.” Check the spray mode of your bidet if you experience pain when washing, as other users might incidentally enable these modes. 

You can always opt for the child mode if the standard spray pressure is uncomfortable. 

4. T-valve 

T-connectors that come with your bidet package aren’t adjustable, but you can also purchase one with an adjustable lever. That allows you to partially shut off the bidet’s water flow without impacting your toilet’s water supply.

5. Shut-off Valve 

A shut-off valve’s main function is to regulate the water supply in your toilet. The water pressure from your bidet will be the same as your home’s water pressure if it’s fully opened. The pressure can reach about 80 PSI. 

Bidet attachments and non-electric bidets do not have added pressure regulators, meaning the water from the valve will go straight to the bidet want. That will make the water stream difficult to bear. 

The only thing you can do to fix this issue is to close the shut-off valve partially. The pressure will minimize; thus, less water will go to the bidet in a fixed time. 

Should You Care About Bidet Water Pressure Being Too High? 

Early detection of high water pressure is key. Here are some reasons you should think about high pressure in your home. 

1. Higher Utility Bills

You are letting out more water whenever you turn on the Sethersons Bidet Converter Kit. All of that adds up in the long run. High pressure could end up costing you more. 

2. It Hurts Your Pipes

Water is powerful. It does its damage over long periods, and the damage is completely done when you notice something is wrong. 

Also, water pressure flowing and stopping in the pipes could cause long-term damage, resulting in small leaks that could indicate structural damage, black mold, or even pipe bursts. 

FAQs

Q: How Can I Fix My Bidet’s High Water Pressure?

A plumbing repair isn’t something most homeowners are comfortable dealing with alone. The ideal thing you can do is to call a professional plumber in your area. A skilled plumber will help you tackle your water pressure issue and offer the ideal solution for your home. 

Often, a pressure regulator installed on your main water line is all your local plumber should do to deal with the issue. 

Q: What Happens When My Water Pressure Is Too High?

Experiencing too high water pressure can cause long-term damage, such as small leaks. It might not sound great, but such leaks can result in structural damage and even pipe bursts. 

Q: What Does Psi Mean in a Bidet?

PSI (pound-force per square inch) refers to the pressure needs for the water going into your toilet, shower, or bidet. People’s household water pressure often falls between 40 and 80 PSI. You can adjust it lower or high at the main shut-off valve outside your home. 

Final Thoughts

It normally takes time for the high water pressure to do massive damage to your bidet. That’s why you should stay on top of your plumbing systems. Also, dealing with the problems before they become larger and more serious is the ideal way to safeguard your bidet and save money.

When was the last time you checked your bidet’s water pressure? Was it high? Low? What made you think you might have a pressure problem? 

Leave a Comment